For screen reader problems with this website, please call952-829-97009 5 2 8 2 9 9 7 0 0Standard carrier rates apply to texts.

Fostex RM Series Silver Powered Stereo Speaker (Each)


Model #:

RM-3

Fostex RM Series Silver Powered Stereo Speaker (Each)-0
Fostex RM Series Silver Powered Stereo Speaker (Each)-1
Fostex RM Series Silver Powered Stereo Speaker (Each)-2
Fostex RM Series Silver Powered Stereo Speaker (Each)-3

At a Glance

Supports balanced/unbalanced analog input and AES/EBU digital input. Power-saving design with digital amplifier and switching power supply. 26-dot LED level meter supports VU and PEAK display.Read More

Available in Store Only
$850.00

Get to know this product.

Product Overview

Product Overview

Space-saving 1U size and mountable in an EIA standard rack (rack mounting angle is removable). JIS standard racks are not supported.

Class-D power amplifier with a maximum output of 10W + 10W.

Equipped with 2 x 110 x 40 mm magnetic shielded elliptical cone full-range speakers.

Analog input (XLR and PHONE combo type) and digital input (XLR, AES/EBU). Through-out for each input is also provided.

Headphone output (20mW + 20mW). Speaker output is muted when headphones are used (plugged in).

Equipped with mute and input source select switches.

MUSIC and VOICE modes are provided. The playback frequency range can be selected according to the sound source and usage conditions.

Monitor output can be selected from STEREO, L, R, or L+R.

Highly visible 26-dot LED meter (L/R). LED brightness can be adjusted in four levels using the DIP switch on the rear panel.

The LED brightness can be adjusted in four levels using the DIP switch on the rear panel.

Standby mode is provided to suppress power consumption to 0.5W or less by keeping the input signal below a certain volume level for 4 hours or by pressing and holding the mute button (approx. 5 seconds).

Useful Documents
Specifications

General Specs

ColorSilver
Color/Finish NameSilver
Speaker TypePowered Stereo Speakers
Frequency Response200Hz to 20kHz
Impedance8 ohms
Mounting Hardware IncludedNo
Speaker Connector TypeXLR
Connection TypeWired
WaterproofNo
Water ResistantNo
Dust ResistantNo
WirelessNo
Wireless Rear SpeakersNo
Wifi CapableNo
Bluetooth CapableNo
Smart CompatibleNo
Airplay CapableNo
Built-in MicrophoneNo
Number of Speakers1
Speaker Width (in.)18.976
Speaker Depth (in.)11.1811
Speaker Height (in.)1.7323
Shipping Width (in.)8.1
Shipping Depth (in.)16.3
Shipping Height (in.)21.7
Speaker Weight (lbs.)7.7162
CollectionRM Series
SeriesRM Series
Wattage10
Voltage100 - 240

Speaker section

Unit110 x 40mm cone type antimagnetic type
Sound Pressure Level84dB/W(1m)

Power Amplifier Section

Maximum output10W+10W
Residual noise-50dBV or less (DIN AUDIO)
Distortion rate0.1% or less
Digital inputConnector: XLR-3-31 type Format: IEC60958 (AES/EBU) Sampling frequency: 44.1kHz to 96kHz
Analog inputConnector: XLR/Φ6.3mm TS phone (combo type) Rated input level: +4/0dBu (XLR), -10/-14dBV (TS phone) Input impedance: 10kΩ min.
PhonesConnector: Φ6.3mm stereo phone Applicable load impedance: 16 ohms or more Maximum output: 20mW+20mW (32Ω/1kHz)